Farbax Introduces New Technology Developments
Hungary — Farbax, a leading company in the European
remanufacturing market and manufacturer of PrintStar cartridges, introduces its
latest development results.
Farbax has developed a new technology for
modifying the Lexmark Optra E310 (12A2202)/312/312L) (13T0101 and 13T0301),
Xerox P8e/ex/ WorkCentre 385 (113R296) and Samsung ML-5000A toner cartridges
(all of which are based on the same Samsung SF-5000 engine) into a universal,
interchangeable version.
This high-quality universal cartridge, called PS
E310/312, has been remanufactured since July 2001 to great customer
satisfaction. In order to use a universal cartridge, the toner hopper section
needs to be modified. The patented insert piece and the installation
instructions are now available to do this.
A new technology is also available
for the reconditioning of the developer roller of the Brother TN-6300
(TN-430)/TN-6600 (TN-460)/TN-7600. The surface of these developer rollers can
sometimes be deformed because of improper storage and handling. This deformation
causes a bad printout that repeats itself every 39 mm (1.5 inches) on the
printed page.
Until now, this damage was only repairable by changing the
developer roller. Farbax has developed a way to repair quickly this defect with
its own device called the Developer Roller Wringer and is ready to repair the
developer rollers of other remanufacturers.
Farbax has repaired several
hundred developer rollers since September 2001 and is now offering the Developer
Roller Wringer with its technology to other remanufacturers.
Farbax has also
developed a solution for problems with the light shutter opener pin in 96A,
27A/X and 61A/X toner cartridges. The light shutter opener pin, which is
necessary for the printer to work properly, may break down because of improper
storage and handling.
With Farbax’s new development, toner cartridges with
this problem can be repaired instead of thrown away. Farbax has also developed a
solution for the breakdown of the axle pin of the drum shutter actuator arm of
96A, 27A/X and 61A/X toner cartridges.
The brochure with details about these
replacement parts with samples and installation guides is available now.
Contact Zoltan Horvath at zhorvath@farbax.flagnet.hu
or fax 36-9431470.
This article originally appeared in the March 2002 issue of Recharger.