CF-Technologies Launches New Tool, Filler Cap for HP 1160, 1320, 2420 Cartridges
DEINZE, Belgium — CF-Technologies has developed a tool for a soldering iron which enables remanufacturers to burn a hole in the toner
hopper, making it possible to refill the hopper of cartridges that do not have
a filling cap.
Some hoppers that do not have a filling cap include the HP
1160, 1320 and 2420 cartridges.
Once a hole is created, it is then sealed off with a
specially designed rubber filler cap with a foam gasket. The gasket is placed
in the groove of the filler cap and assures proper sealing. In the event the
hole is left with small carves and edges or even when the hole is not perfectly
round, a proper sealing is still assured.
CF-Technologies recommends using the tool, the filler cap and
the foam gasket in order to properly seal the toner hopper.
Contact CF-Technologies
- Ph: 828-891-7400
- International: 32-93-813311
- International fax: 32-93-813319
- E-mail: info@cft.be
- Visit: www.cft.be
This article originally appeared in the November 2006 issue of Recharger.